The evaluation of actual fire resistance limits of steel structures exposed to real fire loading

Introduction. The fire resistance limits of load-bearing and enclosing structures can be identified using the method of heat-and-mass transfer calculation in case of fire. The multifactorial nature and nonlinearity of the problem makes the application of this method complicated. If necessary, the temperature regime, demonstrating the conditions of real fire, can be applied. In this work, actual fire resistance limits of metal structures of a thermal power station are calculated.
Goals and objectives. The co-authors attempt to identify the actual fire resistance limits of bearing metal structures in case of the most dangerous fire development scenario.
Methods. Taking into account the complexity of space-planning solutions of a building, the field-focused calculation method was selected. This method is applicable to premises, featuring complex geometric shape, where one geometric dimension is much larger than the others. Non-stationary three-dimensional differential equations of mass, momentum and energy conservation are solved for the gas medium inside a room (the Reynolds type of Navier–Stokes equations), as well as the components of the gas medium and the optical density of smoke. A heat transfer equation is solved to determine the temperature distribution inside the building structure for a one-dimensional case. The fire resistance limit of the building structure is identified as the moment in time following the start of fire, when the temperature in, at least, one point of the structure reaches a critical value.
Results and discussion. Calculation results show that in case of the most dangerous fire development scenario, within 15 minutes as of the start of fire, maximum temperatures of load-bearing metal structures are far below the critical temperature of 500 °C.
Conclusions. Load-bearing metal structures in an engine room, that has steam turbines, don’t need fire protection.

1. Puzach S.V. Methods for calculating heat and mass transfer during a fire in a room and their application in solving practical problems of fire and explosion safety. Moscow, Academy of GPS EMERCOM of Russia, 2005; 336. (rus).

2. Koshmarov Yu.A. Forecasting hazardous factors of a fire in a room : tutorial. Moscow, Academy of the State Fire Service of the Ministry of Internal Affairs of Russia, 2000; 118. (rus).

3. Puzach S.V., Zernov S.I., Bogatishchev A.I., Karpov S.Yu. Calculation of the actual limits of fire resistance of building structures, taking into account the real parameters of the fire, the actions of fire extinguishing systems, mechanical ventilation and smoke removal (mathematical model and calculation method). Saransk, Mordovian book publishing house, 2004; 80. (rus).

4. Puzach S.V. Integral, zone and field methods for calculating the dynamics of fire hazards : Certificate of official registration of the program No. 2006614238 in the Federal Service for Intellectual Property, Patents and Trademarks dated December 8, 2006. No. 2006613462; December 10, 2006. (rus).

5. Puzach S.V. Determination of fire resistance of building structures, taking into account the parameters of a real fire : Certificate of official registration of the program No. 2006614237 with the Federal Service for Intellectual Property, Patents and Trademarks dated December 8, 2006. (rus).

6. Patankar S. Numerical methods for solving problems of heat transfer and fluid dynamics. Moscow, Energoatomizdat Publ., 1984; 150. (rus).

7. Loitsyansky L.G. Mechanics of liquid and gas. Moscow, Nauka Publ., 1987; 840. (rus).

8. Hosoya T., Kawamoto H., Saka S. Pyrolysis behaviors of wood and its constituent polymers at gasification temperature. Journal of Analytical and Applied Pyrolysis. 2007; 78:328-336. DOI: 10.1016/j.jaap.2006.08.008

9. Boonmee N., Quintiere J.G. Glowing and flaming autoignition of wood. Proceedings of the Combustion Institute. 2002; 29(1):289-296.

10. Zelinka S.L., Pei S., Bechle N., Sullivan K., Ottum N., Rammer D.R., Hasburgh L.E. Performance of wood adhesive for cross laminated timber under elevated temperatures. Proceedings, WCTE 2018-world conference on timber engineering, Seoul, Republic of Korea. 2018; 7.

11. Boonmee N.A. A theoretical investigation of surface glowing ignition leading to gas flaming autoignition. Fire Safety Science. 2005; 8:139-150. DOI: 10.3801/iafss.fss.8-139

12. Babrauskas V. Ignition of wood: A review of the state of the art. Journal of Fire Protection Engineering. 2002; 12(3):163-189. DOI: 10.1177/10423910260620482

13. Anon ANSI/APA PRG 320: standard for performance rated cross-laminated timber. APA — The Engineered Wood Association, Tacoma. 2018.

14. Merryweather G., Spearpoint M.J. Flame spread measurements on wood products using the ASTM E 1321 LIFT apparatus and a reduced scale adaptation of the cone calorimeter. Flame and Materials. 2010; 34(3):109-136. DOI: 10.1002/fam.1001

15. Smagorinsky J. General circulation experiments with the primitive equations. Monthly Weather Review. 1963; 91(3):99-164. DOI: 10.1175/1520-0493(1963)091<0099:GCEWTP>2.3.CO;2

16. Kutateladze S.S. Fundamentals of the theory of heat transfer. Moscow, Atomizdat Publ., 1979; 416. (rus).

17. Koshmarov Yu.A. Heat engineering. Moscow, Academy of GPS EMERCOM of Russia, 2006; 501. (rus).

18. White R.H., Dietenberger M.A. Fire Safety. Wood Handbook –– Wood as an Engineering Material, Ch. 17. US, Department of Agriculture, Forest Products Laboratory, 2002; 508.

19. Aseeva R.M., Serkov V.V., Sivenkov A.B., Thanh D.D. Heat and smoke release at the combustion of the different wood varieties. Fire science and technology 6th Asia –– Oceania symposium Daegu, Korea, Korean Institute of Fire Science and Engineering, March 17 (Wed) – 20 (Sat). 2004. Pp. 203–211.

20. Ushanov V.V., Fadeev V.E., Kharitonov V.S., Shchelkunov V.I., Pavlovsky A.V., Kosachev A.A. Fire resistance and fire hazard of sandwich panels and the proposals on amendments to the normative legal acts on fire safety regarding their application in buildings and structures of various functionality. Pozharnaya bezopasnost’/Fire Safety. 2016; 4:119-122. URL: https://www.elibrary.ru/item.asp?id=27521504 (rus).

21. Lyon R.E., Quintiere J.G. Criteria for piloted ignition of combustible solids. Combustion and Flame. 2007; 151(4):551-559. DOI: 10.1016/J.COMBUSTFLAME.2007.07.020

22. Andersen J. Experimental study of the thermal resistance of intumescent coatings exposed to different heating rates : Master of Science thesis, Civil Engineering Department, Technical University of Denmark, Copenhagen, Denmark, 2015.

23. Su J., Lafrance P.-S., Hoehler M., Bundy M. Fire safety challenges of tall wood buildings phase 2: task 2 & 3 cross laminated timber compartment fire tests, fire protection research foundation, Quincy, MA U.S. Energy Information Administration (EIA) (s.d.) Consulté 22 November 2019, à l’adresse. 2018. URL: https://www.eia.gov/energyexplained/biomass/

24. Simões G., Magalhães D., Rabaçal M., Costa M. Effect of gas temperature and oxygen concentration on single particle ignition behavior of biomass fuels. Proceedings of the Combustion Institute. 2017; 36(2):2235-2242. DOI: 10.1016/j.proci.2016.06.102

25. Corbetta A.F., Frassoldati A., Bennadji H., Smith K., Serapiglia M.J., Gauthier G. et al. Pyrolysis of centimeter-scale woody biomass particles: kinetic modeling and experimental validation. Energy & Fuels. 2014; 28(6):3884-3898. DOI: 10.1021/ef500525v

26. Di Blasi C., Branca C., Santoro A., Hernandez E.G. Pyrolytic behaviour and products of some wood varieties. Combustion and Flame. 2001; 124(1-2):165-177. DOI: 10.1016/S0010-2180(00)00191-7

27. Fire load. Directory. Edition 2. May 15, 2014. Building Information Technologies and Systems. SITIS-SPN-1. 2014; 54. (rus).

28. Suzuki J., Mizukami T., Naruse T., Araki Y. Fire resistance of timber panel structures under standard fire exposure. Fire Technology. 2019; 52(4):1015-1034. DOI: 10.1007/s10694-016-0578-2

29. Haseli Y., Van Oijen J.A., De Goey L.P.H. A detailed one-dimensional model of combustion of a woody biomass particle. Bioresource Technology. 2011; 102(20):9772-9782. DOI: 10.1016/j.biortech.2011.07.075

30. Janssens M. Development of a fire performance assessment methodology for qualifying cross-laminated timber adhesives. SwRI Project No. 01.23086.01.001a, Southwest Research Institute, San Antonio, TX. 2017; 78.

31. Aseeva R.M., Serkov B.B., Sivenkov A.B. Fire behavior and fire protection in timber buildings. Germany, Springer Series in Wood Science, 2014; 280. DOI: 10.1007/978-94-007-7460-5

32. Boldyrev A.S., Zolotov P.P., Lyusov A.N., Kabanov N.P., Filippovich N.I. Building materials : a Handbook. A.S. Boldyreva (ed.). Moscow, Stroyizdat Publ., 1989; 567. (rus).

33. Yakovlev A.Ya. Calculation of fire resistance of building structures. Moscow, Stroyizdat Publ., 1988; 143. (rus).

34. Wang L., Dong Y., Zhang D., Zhang D. and Zhang C. Experimental study of heat transfer in intumescent coatings exposed to non-standard furnace curves. Fire Technology. 2015; 51(3):627-643. DOI: 10.1007/s10694-015-0460-7

35. Suzuki J., Mizukami T., Naruse T., Araki Y. Fire resistance of timber panel structures under standard fire exposure. Fire Technology. 2016; 52(4):1015-1034. DOI: 10.1007/s10694-016-0578-2