Increasing the stability of the fire extinguishing foam by replenishing the liquid phase during sprinkling

Introduction. The destruction of foam films occurs when they reach critical thickness and lose the liquid phase as a result of syneresis and evaporation, which are rather difficult to slow down. We have proposed a method for increasing the stability of the fire extinguishing foam by means of replenishing the liquid phase through sprinkling.
Methods. Foam stability was measured by the time of destruction of 25 % of the initial foam volume. The concentration of the foaming agent in the sprinkled solution varied from 0.5 to 6 %. Carboxymethylcellulose sodium salt (Na CMC) was used as a stabilizing additive. Field studies were carried out by feeding foam and solution from two AT-3,2-40 (43253)001-MS tank cars.
Results and discussion. It has been established that the foam stability is influenced by the sprinkling intensity and the foaming agent concentration. Foam sprinkling with the solutions having low concentration of thefoaming agent leads to the washout of surfactants from the films that reduces the foam stability. The sprinkling intensity reduction boosts the foam stability due to the replenishment of the moisture lost through evaporation. The foam stability was maximal in case of sprinkling with a 2 % solution of the foaming agent, while the sprinkling intensity had no influence. An increase in the concentration of the foaming agent in the sprinkled solution led to a decrease in the foam stability. It is found that a smaller amount of the foaming agent is consumed to maintain the amount of foam through sprinkling than to replenish the destroyed amount through additional foam generation. It is shown that various stabilizing additives can be added to the foam in the process of sprinkling. If Na CMC is added to the solution exposed to sprinkling, the time of foam destruction goes up 3–5 times even in case of a non-recurrent sprinkling session. Field tests have confirmed the feasibility of adding stabilizing additives to the foam by means of sprinkling.
Conclusions. The results of the research have shown the feasibility of co-feeding the foam and surfactant solutions, containing various stabilizing additives, in order to extinguish fires and generate stable foams.

1. Ramsden N. Storage tank firefighting. Loss Prevention Bulletin. 2011; 222.

2. Ratzer A.F. History and development of foam as a fire extinguishing medium. Industrial & Engineering Chemistry. 1956; 48(11):2013­2016. DOI: 10.1021/ie50563a030

3. Gochev G., Platikanov D., Miller R. Chronicles of foam films. Advances in colloid and interface science. 2016; 233:115­125. DOI: 10.1016/j.cis.2015.08.009

4. Walstra P. Principles of foam formation and stability. Foams: Physics, chemistry and structure. London, Springer, 1989; 1­15. DOI: 10.1007/978­1­4471­3807­5_1

5. Yu X. et al. Comparative studies on foam stability, oil­film interaction and fire extinguishing performance for fluorine­free and fluorinated foams. Process Safety and Environmental Protection. 2020; 133:201­215. DOI: 10.1016/j.psep.2019.11.016

6. Koksharov A.V., Osipenko S.I., Gainullina E.V. Study of the thermal stability of foam of different expansion ratio. Pozharovzryvobezopasnost/Fire and Explosion Safety. 2020; 29(3):103­110. DOI: 10.22227/PVB.2020.29.03.103­110 (rus).

7. Lyubimov V.N., Skushnikova A.I., Ermakova T.G., Volkova L.I. Improving the sustainability of fire foams using polymeric additives of different nature. Pozharovzryvobezopasnost/Fire and Explosion Safety. 2014; 23(4):77­80. URL: https://www.elibrary.ru/item.asp?id=21519973 (rus).

8. Platikanov D., Exerowa D. Thin liquid films. Fundamentals of Interface and Colloid Science. 2005; 5:6.1­6.91. DOI: 10.1016/s1874­5679(05)80010­8

9. Nguyen A.V. Liquid drainage in single Plateau borders of foam. Journal of Colloid and Interface Science. 2002; 249(1):194­199. DOI: 10.1006/jcis.2001.8176

10. Horozov T. Foams and foam films stabilised by solid particles. Current Opinion Colloid Interface Science. 2008; 13(3):134­137. DOI: 10.1016/j.cocis.2007.11.009

11. Vilkova N.G., Eleneva S.I., Volkova N.V., Brovkina E.N. Foams stabilized by solid particles: the problem of stability. Izvestiya PSPU im. V.G. Belinsky. 2011; 25:684­689. URL: https://www.elibrary.ru/ item.asp?id=17391696 (rus).

12. Koksharov A.V., Gainullina E.V., Kondratieva M.A. Investigation of the effect of solid phase particles size and concentration on the stability of foam­powder fire extinguishing compositions. Technosphere safety. 2021; 1(30):60­68. URL: https://uigps.ru/userfls/ufiles/nauka/journals/ttb/TB%2030/6.pdf (rus).

13. Binks B.B., Horozov T.S. Aqueous foams stabilized solely by silica nanoparticles. Angew. Chemistry. 2005; 44(24):3722­3725. DOI: 10.1002/anie.200462470

14. Gonzenbach U.T., Studart A.R., Tervoort E., Gauckler L.J. Stabilization of foams with inorganic colloidal particles. Langmuir. 2006; 22(26):10983­10988. DOI: 10.1021/la061825a

15. Aleksanyan I.Yu., Buinov A.A. High-intensity drying of food products. Foam gun. Theory. Practice. Modeling : monograph. Astrakhan, AGTU Publishing House, 2004; 380. (rus).

16. Aleksanyan I.Yu., Davidyuk V.V., Saipova L.Kh. A. Optimization of operating conditions of vacuum foam dryer for dry detergents on the basis of protein hydrolisates. Vestnik of Astrakhan State Technical University. 2005; 2(25):292­296. URL: https://www.elibrary.ru/item.asp?id=11160216 (rus).

17. Boyd C.F., Di Marzo M. The behavior of a fire­protection foam exposed to radiant heating. International Journal of Heat and Mass Transfer. 1998; 41(12):1719­1728. DOI: 10.1016/S0017­ 9310(97)00280­9

18. Koksharov A.V., Osipenko S. I. The determination of the critical parameters of the foam generation on the grid foam generator average multiplicity. Technosphere safety. 2017; 1(14):35­38. (rus).

19. Kovalyshyn V.V., Kyryliv Y.B., Grushovinchuk O.V. Interaction between air­filled foam jets of different expansion ratios: experimental study. Fire Safety. 2018; 32:32­38. DOI: 10.32447/20786662.32.2018.05 (ukr).

20. Koksharov A.V., Osipenko S.I., Gainullina E.V., Krikunov A.A. Investigation of the dependence of the thermal stability of foam on the concentration of the foaming agent. Technosphere safety. 2020; 2(27):11­15. (rus).

21. Koksharov A.V., Markov V.F., Buchelnikov D.Yu., Terentyev V.V. Stabilization of high density foams sodium salt of carboxymethylcellulose. Pozharovzryvobezopasnost/Fire and Explosion Safety. 2014; 23(10):79­83. URL: https://www.elibrary.ru/item.asp?id=23136740 (rus).